Skip
Free domestic shipping over 15,000 yen | FREE DHL SHIPPING WORLDWIDE FOR ORDERS 30K+ yen: Details
Free domestic shipping over 15,000 yen | FREE DHL SHIPPING WORLDWIDE FOR ORDERS 30K+ yen: Details
Industrial Music Electronics

Industrial Music Electronics

It is a garage maker by Scott Jaeger, which is no longer in the Eurorack world. Since the beginning of "DIGITAL AUDIO ELECTRONICS", we have been aiming for digital modules suitable for industrial music, and have continued to make wonderful releases with innovative ideas and designs. With the release of the official clone module of the Russian vintage analog synthesizer "Polivoks", its creativity is expanding into the analog domain.
  • Industrial Music Electronics Bionic Lester mkIII

    ¥69,900 (Tax excluded ¥ 63,545)
    Pre-Order
    Dual 2-pole digital filter with aggressive sound

    MUSICAL FEATURES Bionic Lester is a 2-channel 2-pole state variable digital filter with a unique aggressive character. The filter mode changes continuously with the knob and CV, and changes from low pass → band pass → high pass → notch → all pass / comb. Digital...

    details
  • Industrial Music Electronics Kermit mkIII

    ¥57,900 (Tax excluded ¥ 52,636)
    Pre-Order
    4-channel programmable super modulator oscillator

    MUSICAL FEATURES Kermit is a 4-channel, wavetable oscillator (optimized for LFO) that can be synchronized with tempo and can switch between many modes. The C and D oscillators have one knob, but you can independently set parameters that are almost the same as A and B by operating the button combo. Each channel is an LFO, ...

    details
  • Industrial Music Electronics Black Locust (Model 1979)

    Out of Stock
    4-channel guitar pedal adapter / feedback module

    The MUSICAL FEATURES Black Locust is a 4-channel guitar effects pedal adapter for synthesizers.The bottom 1/4 inch jack can be used in two ways, and by inserting a TRS insert cable, you can lower the signal level for guitar effects, and from the effects ...

    details
  • Industrial Music Electronics Double Andore mkII (Model 2017-2)

    Out of Stock
    High-performance dual AD envelope / VCA that enables dynamic and complex volume changes!

    MUSICAL FEATURES Double Andore mkII is a VCA / envelope module with a strong character.The AD envelope internally wired to the two high quality linear VCAs varies the magnitude of the amplifier (volume) of the two signal paths.Each machine ...

    details
  • Industrial Music Electronics English Tear (Model 2401)

    Out of Stock
    Korg MS Series ⇔ Eurorack Converter Module

    The MUSICAL FEATURES English Tear is a Eurorack format voltage regulator for seamless connectivity and conversion with Korg's MS series synthesizers.For example, pitch control is Hertz per Volt (Hz / V) method for MS series, 1 for Eurorack ...

    details
  • Industrial Music Electronics Hertz Donut Mk III (Model 9791-3)

    ¥76,900 (Tax excluded ¥ 69,909)
    In Stock
    FM / Complex oscillator with 2 operators

    MUSICAL FEATURES Hertz Donut mkIII is a powerful digital complex oscillator with detuned unison, 3x4 modulation matrix, and external input. In addition to frequency in the primary oscillator, Phase Distortion, Umbrage, Re ...

    details
  • Industrial Music Electronics King Slender (Model 1123)

    Out of Stock
    Slew Limiter and mixer module with unique specifications!

    MUSICAL FEATURES King Slender is a utility module that combines two functions.The upper part is a linear through limiter, and CV control of Rise / Fall time is possible in addition to the knob (modulation destination can be selected from either Rise or Fall with a switch). ...

    details
  • Industrial Music Electronics Lider Suboctave (Model r1984)

    Out of Stock
    Analog frequency divider

    JACKS and KNOBS MUSICAL FEATURES Lider Suboctave is a unique analog frequency divider with wet / dry mix and stability control.Depending on the stability control, it is also possible to input a noisy sound and convert it to a strange sound ...

    details
  • Industrial Music Electronics Malgorithm Mk II (Model 2012-2)

    Out of Stock
    Stereo bit crusher / sample rate reducer with continuous bit reduction control and 256 wave shapers

    JACKS and KNOBS Bit Depth Bit depth control and CV input (0-5V, with atte inverter) for bit crash.It is full to the right and has the maximum bit depth. Sampling Rate Sampling rate control and CV input (0-5V, with Atte inverter) ...

    details
  • Industrial Music Electronics Multiple Miggs

    Out of Stock
    The Harvestman Passive Multiple & Attenuator

    MUSICAL FEATURES Passive Multiple & Attenuator

  • Industrial Music Electronics Piston Honda Mk III (Model 1991-3)

    ¥76,900 (Tax excluded ¥ 69,909)
    Pre-Order
    2 oscillators, loading of original waveforms, dual wavetable oscillator with greatly improved power such as preset function

    MUSICAL FEATURES Piston Honda mkIII is a dual wave table oscillator. It is equipped with more modern functions while inheriting the sound tendency of Piston Honda up to Mk2. Dual Wavetable Oscillator Piston Hon ...

    details
  • Industrial Music Electronics Polivoks Modulator (Model r1987)

    Out of Stock
    A compact Polivoks modulation utility packed with noise, LFOs, samples and holds, etc.

    JACKS and KNOBS MUSICAL FEATURES Polivoks Modulator is a modulation utility packed with noise, LFO, sample and hold functions.The noise source is the same as the original to keep the character of Polivoks ...

    details
  • Industrial Music Electronics Polivoks VCA/ADSR (Model r1985)

    Out of Stock
    VCA + ADSR envelope suitable for drone sounds, etc.

    JACKS and KNOBS Bias (Initial Level) Control This knob controls the VCA bias (gain when CV = 0). CV Inputs Two CV inputs with an atte inverter. The first CV input is AD when unpatched ...

    details
  • Industrial Music Electronics Polivoks VCF (Model r1982)

    Out of Stock
    Polivoks clone filter with vintage character

    JACKS and KNOBS MUSICAL FEATURES A clone module of Polivoks filter with a very attractive rough and thick sound quality. With the characteristics of 2Pole (12db / Oct), resonance is controlled by a knob, and when it is turned greatly to the right, unstable self-oscillation occurs.band...

    details
  • Industrial Music Electronics Polivoks VCG mk II (Model r1983)

    Out of Stock
    Polivoks official clone Sawcoa oscillator with thick sound quality

    JACKS and KNOBS Frequency Control Frequency control of the oscillator. There is also a 3-step octave switch. FM (Exponential) Input Exponential FM input (with atte inverter) 1V / Oct Input 1V / Oct input ...

    details
  • Industrial Music Electronics Sound of Thunder (Model 1973X2)

    Out of Stock
    A powerful expander for the Tyme Sefari Mark II that adds many modes of operation and enables stereo input and output.

    JACKS and KNOBS MUSICAL FEATURES Sound of Thunder is a powerful 8HP expander that adds various operating modes and stereo inputs and outputs to the Tyme Sefari MkII.ON / OFF of each operation mode and switching of the state are all switches ...

    details
  • Industrial Music Electronics Stillson Hammer Mk II

    Out of Stock
    Powerful and intuitive 4-track CV gate sequencer!

    MUSICAL FEATURES * Firmware version is in the 2nd series, gate probability, burst probability, step repeat, 3 parameters have been added, random walk has been added to sequence mode, rotation function, preset CV control function, etc. have been added. Stillson Hammer ...

    details
  • Industrial Music Electronics Tyme Sefari Mk II (Model 1973)

    Out of Stock
    An audio memory module that can be used for various purposes such as delays and samplers by recording and playing audio in various ways.

    JACKS and KNOBS Load / Save Button Press the Save button to temporarily stop the audio and save the contents of the memory.If the "WRITE PROTECT" jumper on the back of the board is ON, you will not be able to save. Recall the contents of memory with the Load button ...

    details
  • Industrial Music Electronics Zorlon Cannon MKII (Model 1986-2)

    Out of Stock
    High-performance linear feedback shift register that can be used as a random voltage that can be controlled from digital noise generation, a sequencer, etc.

    JACKS and KNOBS CH A External Clock Input A external clock input.When there is an input, the internal clock is released and synchronized with the external clock. CH A Mix Output A signal output that mixes the four outputs belonging to the clock through the Atte inverter ...

    details
View all
x