Utility / Tool / Cable

MUSICAL FEATURES Screws for fastening the Eurorack module to the rail.6 mm long, set of 50 (the number of images varies).All Eurorack modules sold in our shop come with M3 screws, including used ones, so if the rail of your case is M3, you do not need to purchase it normally.

MUSICAL FEATURES Pico Drums A device for uploading samples to the module.In addition to this device, the Google Chrome plug-in for upload software is required. * USB cable (mini-B) is not included. Pico Drum Progr ...

Hub is a 4-channel passive multiple.Currently, the design is not the Intellijel logo, but the robot mark.

* There may be scratches due to manufacturing. Please be aware of this before purchasing. MUSICAL FEATURES Joint parts for connecting two 2U Performance Cases.

MUSICAL FEATURES A cable holder (size 3.5mm) for hanging 300mm patch cables. Two screws for wall mounting and two anchors for mounting gypsum board are included. ※ Tip Stackcable is thick, so it will put a load on it, so do not use it ...

MUSICAL FEATURES A cable holder (size 3.5mm) for hanging 200mm patch cables. Two screws for wall mounting and two anchors for mounting gypsum board are included. ※ Tip Stackcable is thick, so it will put a load on it, so do not use it ...

MUSICAL FEATURES This is a 4-pin cable for chaining the 3ms Listen Four, Listen Four Quarters, Listen IO, Wav Recorder module input / output.

This is a new version of the balanced stereo input / output section of the MUSICAL FEATURES 7U Performance Case. This board is included in the 2019U Performance Case from the first half of 7, but if you purchased it before that, you can replace it with four boards and ...

It is a conversion mono cable of 3.5mm ⇔ 1/4 inch.

MUSICAL FEATURES Screwdriver for mounting modules. Reversible and can also be used as a minus driver. Made by Electrosmith.

MUSICAL FEATURES Tiptop Audio Mantis It is a bracket that can connect two cases.

A rack ear kit for mounting the MUSICAL FEATURES SYNTRX on an EIA 19-inch standard sradio rack. Remove the side wood of the SYNTRX body and install this rack ear. * A pair of 2 bottles.The SYNTRX body and open rack system in the image are not included.  

The MUSICAL FEATURES Din-Sync Adapter Cable is a module that separates the DIN Sync signal connected to the DIN connector into a CLOCK signal and a RUN signal, converts them to a normal Eurorack 3.5mm TS plug, and vice versa. DIN Sync is TR-606 ...

The MUSICAL FEATURES Befaco Knurlies are rack mount screws designed for Eurorack.Knurlies, which can be tightened with a finger, screwdriver, or hex wrench, are pre-installed with plastic washers to prevent scratches when mounted ...

MUSICAL FEATURES Befaco Bananuts are custom anodized minijack nuts that follow the Buchla / Serge coloring code.Great for color-coding inputs and outputs and for personalizing your favorite modules.This nut driver is for installation ...

The MUSICAL FEATURES Befaco Wrench Tool is a nut driver with the Befaco logo that can be used with Bananuts and common 3.5mm round nuts. 

MUSICAL FEATURES High quality Befaco interface cable with 3.5mm monaural mini plug and 6.3mm monaural standard plug at both ends.This is useful when connecting Eurorack system signals to external devices such as mixers, effect pedals, and audio interfaces. 1 ...

Befaco's Passive Multiple with 3.5 MUSICAL FEATURES 6mm jacks. Sold as a 3-color set.

The MUSICAL FEATURES Befaco DIN 5 MIDI to TRS Cable is a suitable cable for standard MIDI connections on devices with TRS jacks, such as Eurorack modules and groove boxes.One end of the cable is a 5-pin DIN jack (male), the other is a 3.5mm stereo ...

Cable for connecting groups to channels (Quad Stero Channel or Stero Channel) in a MUSICAL FEATURES CGM Creative Mixer system.Two cables are connected in parallel for group-channel and channel-channel connections.

The MUSICAL FEATURES Befaco Synth Duster is a very soft cleaning brush that protects modular systems and audio equipment from dust and dirt.The long bristles make it easy to clean the intricate knob gaps.

MUSICAL FEATURES Klavis Nodrain is a voltage converter for Eurorack power supplies that do not have a dedicated 5V supply.A highly efficient switching power supply circuit allows the adapter to perform conversions at megahertz frequencies well above the audible range, drawing its own power from the -12V rail and...

MUSICAL FEATURES MIDI (DIN) 5-pin female to TRS 3.5mm male conversion adapter (Type B), compatible with all ELM Busy and Arturia instruments, but with Make Noise and Korg MIDI. It cannot be used because the pin distribution a? E is different from TRS ...

MUSICAL FEATURES A cable with a floating Ring part between TRS and TS.This cable is recommended when outputting CV from a commercially available audio interface with balanced output.

MUSICAL FEATURES 5mm TS cable splitter that splits the input signal into five

Up to 4 Pressure Points can be connected! Please refer to the Pressure Points page for connection method.

MUSICAL FEATURES Cable for connecting multiple groups in the CGM Creative Mixer system. You can connect one Group to Masterone with the Master to Group cable that comes with Masterone, but the number of Groups connected to Masterone is limited.

MUSICAL FEATURES CGM Creative Mixer system, cable for connecting from Masterone to one Group. Comes with Masterone. A Master to Group cable has three IDC connectors, one for the group and one for the master...

MUSICAL FEATURES An original serial programmer that users can use to update the firmware of Shakmat modules, including the Bard Quartet (the company's module FW can also be updated with commercially available FTDI programmers).

MUSICAL FEATURES Zero HP Mult is a 1:5 cable splitter/passive multiple.It can be used to send master clocks and modulations without sacrificing system rack space, or as a simple cable extension.

MUSICAL FEATURES Banana and alligator clip conversion adapter.You can convert it to an alligator by inserting a banana plug.

MUSICAL FEATURES Banana jack and 3.5mm mono conversion cable for Eurorack. *When patching between Eurorack systems and Banana systems, it is necessary to share the ground.When using this conversion cable, at least one cable must be a Y-type, and the branched black bar...

MUSICAL FEATURES An adapter that allows you to connect to a banana jack by touch or with an alligator clip.

MUSICAL FEATURES Clip type sensor cable that can be used with Instruo Scion.

MUSICAL FEATURES Banana Jack and 6.35mm (1/4") mono conversion cable. *When patching between a system with a 1/4 inch jack and a banana system, it is necessary to share the ground.When using this conversion cable, at least one cable must be a Y-type and branched...

MUSICAL FEATURES An arm-mounted cable hanger with a metal clamp.The arm can be bent flexibly.