1U (Intellijel)

MUSICAL FEATURES Out is a 1U stereo output module designed for converting audio signals from modular to line level. The signal patched to Main In is output to the pin on the back, so you can connect that pin to the Intellijel Performance Case or Palette Ca...

The MUSICAL FEATURES ST Amp is a 1U stereo amplifier designed for boosting external signals to modular levels.This module is designed in Intellijel 1U format and uses the same pinout, so it is fully compatible with the rear connector of the Intellijel case...

MUSICAL FEATURES STMix is ​​a 1U format/28HP 4-channel stereo mixer.Besides working alone, it works as an expander for the company's Hexmix module via a 6-pin connector on the back.This module is designed in Intellijel's 1U format...

This is an input/output module for using the MUSICAL FEATURES AUDIO I/O 1U in a 4U space such as a 1U case (old type that is not Palette).

Intellijel's 1U module is not compatible with the 1U "TILE" format from Synthrotek or Pulp Logic. Please install it in Intellijel's 4U, 7U case, etc. Click here for Intellijel 1U size specifications. MUS ...

Intellijel's 1U module is not compatible with Synthrotek or Pulp Logic's 1U "TILE" format. Please install and use it in the 4U, 7U case of Intellijel. Click here for the size specifications of the Intellijel 1U. M ...

The MUSICAL FEATURES CVx is an expander module that connects to the company's MIDI 1U module and adds eight CV outputs.These additional outputs are fully programmable using the Intellijel Config app and are a control option for your Eurorack system ...

Intellijel's 1U module is not compatible with the 1U "TILE" format from Synthrotek or Pulp Logic. Please install it in Intellijel's 4U, 7U case, etc. Click here for Intellijel 1U size specifications. MUS ...

MUSICAL FEATURES Compact 2-channel VCA module. The characteristics are linear and DC coupling. The signal and CV inputs are internally wired so that the input to A is routed when not patched to the B channel. Also, when not patched to the A channel signal output, the A output goes to B ...

Intellijel's 1U module is not compatible with the 1U "TILE" format from Synthrotek or Pulp Logic. Please install it in Intellijel's 4U, 7U case, etc. Click here for Intellijel 1U size specifications. MU ...

MUSICAL FEATURES FSR 1U is a pressure CV output module using a custom-made sensing resistor (Forse sensing resistor). In addition to the CV output according to the pressure, the gate signal is output from GATE while touching DEMO

MUSICAL FEATURES Line In 1U is a compact and easy solution for optimizing line level external equipment such as hardware synthesizers and drum machines to Eurorack level.Your desktop gear, rack-mount type effect unit, output from your DAW, etc., balun ...

Intellijel's 1U module is not compatible with the 1U "TILE" format from Synthrotek or Pulp Logic. Please install it in Intellijel's 4U, 7U case, etc. Click here for Intellijel 1U size specifications. MUS ...

MUSICAL FEATURES Intellijel Designs' MIDI 1U system gives you everything you need to control and sync your Eurorack modular via MIDI from your computer, mobile, or hardware device. The main MIDI 1U module ...

Intellijel's 1U module is not compatible with the 1U "TILE" format from Synthrotek or Pulp Logic. Please install it in Intellijel's 4U, 7U case, etc. Click here for Intellijel 1U size specifications. MU ...

MUSICAL FEATURES Multi-FX is a mono stereo input / output effect module with well-tuned switchable delay, chorus, and reverb effects. The effect mode is switched with a switch, and the role of each knob differs depending on the mode. The Time knob shows the delay time ...

MUSICAL FEATURES 1U toolbox module with noise, sample & hold, and slew limiter functions.A clock whose speed can be adjusted and a random pulse output linked to it Analog pink noise/white noise output Analog sample & hold analog sound...

MUSICAL FEATURES Octalink 1U is a module for sending 8 signals together with one LAN cable. Having the patch between the two 1U cases done through the Octalink 2U can be useful if you want to move the cases apart and restore the patch later. Doepfer A-7 -...

MUSICAL FEATURES Passive LPG 1U is a simple passive low pass gate of Bactrol base, 1U. The acoustic characteristics of Bactrol LPG, which is a passive circuit that does not require a power supply, depends to some extent on the input audio signal, and can give a natural and organic change in the volume and timbre of the signal.

MUSICAL FEATURES Pedal I / O 1U is an interface module for using the effect pedal modularly. It features high impedance inputs and individual send and return gain adjustments to allow you to use various effect pedals at optimal levels. The dry and wet mix of effects is also ...

MUSICAL FEATURES This is the module for the 4/1 inch jack part required when using the Peda I / O 1U in the old Intellijel type 4U case that is not the Palette type.

Intellijel's 1U module is not compatible with the 1U "TILE" format from Synthrotek or Pulp Logic. Please install it in Intellijel's 4U, 7U case, etc. Click here for Intellijel 1U size specifications. MU ...

MUSICAL FEATURES This is a 30U module with a switch for drawing power from the AC adapter to the Intellijel bus board TPS1W.

MUSICAL FEATURES This is a 80U module for drawing power from the AC adapter to the Intellijel bus board TPS1W.

MUSICAL FEATURES This is a 4CH utility module that can also be used as an attenuator (attenuator), offset voltage output, and mixer. Each channel-When the input is patched: Attenuates the input signal. Attenuator when the switch is "UNI" on the left, "+ / -..." on the right.

MUSICAL FEATURES 1U format ring modulator.From two input source waveforms, X and Y, generates a third waveform containing the sum and difference of their frequencies.You can use ring modulation at audio rates to create discordant, metallic sounds, or at LFO rates to create complex...

MUSICAL FEATURES Steppy 1U is a 4-track gate sequencer module. Equipped with 8 memory slots, synchronization with an external clock, and various sequence options, it is designed to be powerful in performance. You can set the sequence step length for each track, ...

The MUSICAL FEATURES Stereo Line In 1U is a compact interface system for introducing external audio into Eurorack systems.Using this system that supports balanced + 4dBu professional audio equipment and -10dbV unbalanced equipment, external device ...

Intellijel's 1U module is not compatible with the 1U "TILE" format from Synthrotek or Pulp Logic. Please install it in Intellijel's 4U, 7U case, etc. Click here for Intellijel 1U size specifications. MUS ...

MUSICAL FEATURES A dedicated module for outputting modular audio signals to mixers and audio interfaces. Stereo input / output. If you patch only the L input, the signal will also be automatically patched to the R input, and you can output mono as stereo. When using this 1U module ...

MUSICAL FEATURES This is a 4U module of the jack part required when using Stereo Line Out 1U in the case of the 1st generation Performance case or the case of Intellijel which is not a XNUMXU pallet type.

Intellijel's 1U module is not compatible with the 1U "TILE" format from Synthrotek or Pulp Logic. Please install it in Intellijel's 4U, 7U case, etc. Click here for Intellijel 1U size specifications. MUS ...

The MUSICAL FEATURES Intellijel Switched Mult 1U is an expandable dual-bus passive multiple. You can specify the bus to use as a mute that doesn't connect to either the X or Y bus, or either bus, via the 6-position switch that each of the six jacks has ...

MUSICAL FEATURES uMIDI is a MIDI-to-analog signal conversion module that provides the functions required to synchronize and control modular devices from computers, iOS devices, and MIDI hardware. There is no need for menu operation, etc., and it can be easily used with two buttons ...

  MUSICAL FEATURES USB Extender extends the micro USB connector on the back of the module and places it on the front panel of the case for easy connection to a USB host. A utility originally designed for Metropolix 1.4 MIDI updates, but...

MUSICAL FEATURES A module for supplying electricity from a USB connector. Convenient for driving lamps and MIDI controllers powered by USB.Power is drawn from the 5V on the bus board.The connection is made by inserting the 2-pin header cable into the header on the bus board. Current supply of 1A or more ...