Skip
Free domestic shipping over 15,000 yen | FREE DHL SHIPPING WORLDWIDE FOR ORDERS 50K+ yen : Details
Free domestic shipping over 15,000 yen | FREE DHL SHIPPING WORLDWIDE FOR ORDERS 50K+ yen : Details
Industrial Music Electronics Zorlon Cannon MKII (Model 1986-2)

Industrial Music Electronics Zorlon Cannon MKII (Model 1986-2)

Industrial Music Electronics
¥54,890 (Tax excluded ¥49,900)
High-performance linear feedback shift register that can be used as a random voltage that can be controlled from digital noise generation, a sequencer, etc.
Noise / Chaos Generator Random
Format: Eurorack
Width: 15HP
Depth: mm
Current: mA @ + 12V, mA @ -12V
Manual pdf (English) <

JACKS and KNOBS

CH A External Clock Input

A external clock input.When there is an input, the internal clock is released and synchronized with the external clock.

CH A Mix Output

It is a signal output that mixes the four outputs belonging to the A clock through the Atte inverter.

CH A: Attenuverter

Each output has an attenuator, allowing you to adjust the amount sent to MIX OUT.By setting it in the center, the amount sent to MIX OUT is 0V, it is added clockwise and subtracted counterclockwise.

CH A Individual Output

Individual outputs of four LFSRs powered by the A clock.

CH A Internal Clock Control

Control of A's internal clock.It can be controlled by a CV with a knob and an Atte inverter.The button switches the clock range, and red = low / orange = normal / green = double.In double mode, it responds to both ON timing (rise) and OFF timing (fall) of the external clock.

LENGTH / TAP LED

Indicates whether the LENGTH / TAP encoder is setting LENGTH or TAP for the selected LFSR.

LFSR LEDs

Displays the LENGTH and TAP positions of the selected LFSR.

Length / Tap Button

Switches the setting target of the selected LFSR between LENGTH / TAP.

Output Select

Set the LENGTH / TAP setting by turning the encoder while pressing the Output Select button. Switch the LFSR to be edited.

You can also save the current LENGTH / TAP settings by pressing and holding the encoder for 2 seconds.Press the encoder twice quickly to load the settings.

CH B

The output is bipolar, but otherwise it is similar to CH A.

Seed Input

It is a SEED input that can reset the SEED that points to the initial value of the data by sending a gate. It works on all eight LFSRs.

When you move the cursor to the screen, the role of each part is displayed in a pop-up.

MUSICAL FEATURES

Zorlon Cannon is a sound generator / gate sequencer that uses eight linear feedback shift registers (Linear Feedback Shift Register / LFSR). The name of LFSR seems to be difficult, butLENGTHとTAPIt is the biggest feature just by setting two ofPseudo-random sequence with periodicityGeneration andDigital noise, Atari 8-bit computer's POKEY sound chip produces the same tone.Sound settings are displayed in the central bar graph and are controlled by the rotary encoder. By freely manipulating the settings of the Zorlon Cannon, you can control the musical and mathematical characteristics of the LFSR up to 16 bits.It has the following features.
  • -Clocks are independent for A and B.
  • -The upper row is ideal for the gate sequencer, and the lower row is ideal for audio.
  • -Internal clock generator that supports three frequency ranges
  • ・ Equipped with clean audio and external clock input for synchronization
  • ・ PWM is possible when used in combination with an external clock (responds to rise and fall)
  • ・ Bipolar signal can be generated with a mixer with a 4-channel inverter.
  • -The length and tap settings of each LFSR can be edited, and the settings can be saved in the non-volatile memory.You can save the current LENGTH / TAP settings by pressing and holding the encoder for 2 seconds.Press the encoder twice quickly to load the settings.
  • -With a gate input to reseed the shift register in the non-longest tap sequence state
Top
x