Skip
Free domestic shipping over 15,000 yen | FREE DHL SHIPPING WORLDWIDE FOR ORDERS 50K+ yen : Details
Free domestic shipping over 15,000 yen | FREE DHL SHIPPING WORLDWIDE FOR ORDERS 50K+ yen : Details

Controller

  • Instruo SCION

    ¥55,900 (Tax excluded ¥50,818)
    Pre-Order
    Biofeedback random generator

    MUSICAL FEATURES SCION is a quad random voltage generator that uses a biofeedback sensor.Converts electrical movements from plants and other organisms into a musically usable voltage. Based on Midi Sprout by Datagarden, but considering use in a Eurorack environment ...

    details
  • Intellijel Designs FSR 1U

    ¥12,900 (Tax excluded ¥11,727)
    Pre-Order
    Convenient module to convert pressure to CV and output

    MUSICAL FEATURES FSR 1U is a pressure CV output module using a custom-made sensing resistor (Forse sensing resistor). In addition to the CV output according to the pressure, the gate signal is output from GATE while touching DEMO

  • Intellijel Designs Planar 2

    Out of Stock
    The ultimate joystick / quad mixer / panner with recording / playback function

    MUSICAL FEATURES Planar 2 is a multi-input / output CV / audio mixer and panner that fully utilizes the characteristics of the joystick. The joystick's unique operability allows you to perform many delicate and simultaneous controls. There are four inputs from A to D, these are joysticks ...

    details
  • Bela Gliss

    ¥24,900 (Tax excluded ¥22,636)
    Pre-Order
    High-performance touch controller that can be used as CV output by position and area, motion recording, loop trigger, keyboard, etc.

    MUSICAL FEATURES Gliss is a 4HP Eurorack module for introducing gesture control into your modular system by moving and playing your fingers on a recordable touch strip. Gliss simultaneously generates two high-resolution signals: one according to finger position, the other...

    details
  • Make Noise Rene 2

    ¥89,900 (Tax excluded ¥81,727)
    Pre-Order
    A unique West Coast CV / Gate sequencer with 3 sequence directions, perfect for performance

    MUSICAL FEATURES Rene 2018 is a 1D sequencer with 3 sequence directions, expanding the concept of a conventional sequencer that moves only in one direction in a straight line. It was named Rene after the mathematician Rene Descartes who established the concept of Cartesian coordinates. The original version of Rene is XY seat ...

    details
  • Malekko Heavy Industry Voltage Block (Black)

    Out of Stock
    A powerful CV sequencer with 8 outputs and 16 stages with unique and flexible functions! Great for pitch to modulation applications

    The MUSICAL FEATURES Voltage Block is an eight independent 8-stage CV sequencer. Many performance features and preset storage features make it a very flexible CV tool. In the sequence, move the slider in real time or specify the step with the step button at the bottom ...

    details
  • Joranalogue Switch 4

    ¥20,900 (Tax excluded ¥19,000)
    Pre-Order
    Buffard type switch / router that can be used for live performances

    The MUSICAL FEATURES Switch 4 is a practical switch / router for live performance with Eurorack Modular. With a custom-made switch mounted on the intuitive interface, you can quickly mute audio, trigger an envelope, select a modulation source, etc ...

    details
  • Erica Synths Black Joystick 2

    ¥39,900 (Tax excluded ¥36,273)
    Pre-Order
    Equipped with 4 operation modes that can record motion. 8-channel multifunctional modulation / sound source

    MUSICAL FEATURES Erica Synths Black Joystick 2 is an 8-channel multifunctional CV / sound source.As a joystick / movement recorder / characteristic LFO, and a drone / noise oscillator, the Black Joystick 2 is modular ...

    details
  • Befaco / DivKid Mutes

    ¥19,900 (Tax excluded ¥18,091)
    Pre-Order
    Equipped with a bactoroll that provides a unique decay. Click-free mute performance module with 3-position switch

    MUSICAL FEATURES Befaco / DivKid Mutes is a 4-channel flexible mute performance tool created in collaboration with DivKid.Each channel has a bactrol-based 3-position mute switch and L ...

    details
  • CG-Products Peak+Hold

    Out of Stock
    Interface module that captures percussion and drum machine sound information using a pickup

    MUSICAL FEATURES Peak + Hold is a utility for capturing the sounds of vibrating musical instruments and rhythm machines and outputting various voltage information.Similar to an external input module with an envelope follower, but with a pickup that transforms the vibration of a raw percussion instrument or object into an electrical signal ...

    details
  • Intellijel Designs Tete

    ¥53,900 (Tax excluded ¥49,000)
    In Stock
    Expander that adds loop and sequencer functionality to Tetrapad

    MUSICAL FEATURES Tete is an expander module that allows you to capture and save Tetrapad movements and perform loops and sequences. You can use the synchronization and modulation functions with the clock to add various changes. With Tetrapad equipped with Tete, Tete ...

    details
  • Intellijel Designs XFADE 1U

    ¥32,900 (Tax excluded ¥29,909)
    Pre-Order
    A small crossfader made by Innofader is used. DC-coupled stereo crossfader

    MUSICAL FEATURES XFADE 1U is a classic DJ-style stereo crossfader with Eurorack features. The XFADE 1U has LR inputs on both sides of 'A' and 'B', and based on switch-selected curve shapes and fader positions, these two stereo signals...

    details
  • Intellijel Designs Tetrapad

    Out of Stock
    Pressure-sensitive panel module that enables various controls by setting

    MUSICAL FEATURES Tetrapad is a pressure-sensitive multi-dimensional controller that can be used for many purposes. The four pads are sensitive to the vertical position and pressure of the touched point, and replace it with a voltage for output. Tetrapad can operate in various modes. There are 4 operating modes and 9 global setting mode ...

    details
  • Befaco Morphader

    ¥39,900 (Tax excluded ¥36,273)
    Pre-Order
    Control 4 VC crossfaders with the master fader.Performance crossfader for complex CV / audio mixing

    MUSICAL FEATURES Befaco Morphader is a performance tool that makes it easy and comfortable to create multi-channel CV / audio crossfades.This unit consists of four VC crossfaders, each with an independent control, and a master fader that controls them all at once ...

    details
  • P4L SWT

    ¥7,400 (Tax excluded ¥6,727)
    Pre-Order
    Utility equipped with 3 channels of 1:2 manual switches

    MUSICAL FEATURES SWT is a simple utility module with two 3IN/1OUT routing selectors. A manually operated 2-way switch allows you to select which of the three inputs is output, and the audio/CV/GATE signal routing selector...

    details
  • Malekko Heavy Industry Voltage Block

    Out of Stock
    A powerful CV sequencer with 8 outputs and 16 stages with unique and flexible functions! Great for pitch to modulation applications

    The MUSICAL FEATURES Voltage Block is an eight independent 8-stage CV sequencer. Many performance features and preset storage features make it a very flexible CV tool. In the sequence, move the slider in real time or specify the step with the step button at the bottom ...

    details
  • Verbos Electronics Mini Horse

    Out of Stock
    Touch plate controller that enables control of the entire system with multiple outputs

    MUSICAL FEATURES Verbos Electronics Mini Horse is a controller module for the Eurorack that uses a touch plate. Position output that outputs CV according to the pressed position on the touch plate, Press output that outputs CV according to the area where the touch plate is pressed.

    details
  • Make Noise Pressure Points

    ¥36,900 (Tax excluded ¥33,545)
    Pre-Order
    A manual controller that uses copper wires and can be used like an advanced keyboard! Combined with Brains, it can also be a sequencer.

    MUSICAL FEATURES Japanese manual (pdf) is available. Pressure Points (PP) is a manual controller that has the function of expanding a keyboard by pressing a touch plate made of copper wire. However, this keyboard can be anything controlled by CV, not pitch ...

    details
  • P4L MG3

    Out of Stock
    3 channel momentary gate switch

    MUSICAL FEATURES A manual gate module that can be used to trigger drums, envelopes, and other events on Eurorack systems. Outputs +12V as gate voltage while the button is pressed. It can also be used as a CV source in combination with an attenuator, etc.

  • Michigan Synth Works F8R

    ¥38,900 (Tax excluded ¥35,364)
    In Stock
    CV, MIDI, I60C compatible control surface with 2mm LED fader

    MUSICAL FEATURES F8R is an 8 channel 16HP Eurorack control surface.Main Features 60mm long LED fader CV range can be switched between 0-5V, 0-10V, -5 to +5V for each channel with a switch CV output is full analog Lea...

    details
  • Ritual Electronics Pointeuse

    Out of Stock
    A footswitch can also be used with the included expander. 1U format bidirectional analog switch

    MUSICAL FEATURES Pointeuse is a CV controllable bi-directional analog switch that can be used as a momentary footswitch adapter for Eurorack. Pointeuse has these two...

    details
  • Befaco Joystick

    ¥30,900 (Tax excluded ¥28,091)
    Pre-Order
    Equipped with CV range and offset controls. 2 Arcade-style joystick controller that can handle inputs

    The MUSICAL FEATURES Befaco Joystick is a compact joystick controller / gate generator.An arcade-style joystick that returns to the center when the stick is released is used.With this unit, which can generate / process two CVs with one hand, a small knob ...

    details
  • 4ms Catalyst Controller

    ¥66,900 (Tax excluded ¥60,818)
    In Stock
    Macro controller that controls and morphs 8 CV channels simultaneously

    MUSICAL FEATURES Catalyst Controller is a macro controller with 8 precision CV outputs and a crossfader for transitioning between scenes. A scene is a snapshot of up to 8 CV outputs, like a modular preset. Crossfader and external CV signal...

    details
  • Make Noise Rene v1 [USED:W0]

    USED
    ¥36,900 (Tax excluded ¥33,545)
    In Stock
    A deep sequencer featuring two directions of travel and flexible gate input / output!

    JACKS and KNOBS X-CLK When a gate or clock signal of 2.5V or higher is input, the sequence advances by one in the X direction. In Snake mode, it operates as a clock input that advances the sequence by one. With input to further change the sequence of X-MOD Rene, ...

    details
  • Trogotronic m11

    Out of Stock
    Very flexible performance switch / VCA that can be used intuitively!

    MUSICAL FEATURES m11 is a VCA / switch that can be used in numerous ways. When no signal is input to CV IN, turning on the button or "Hold" switch turns on the CV of m11, and the voltage (0-10.5V) set with the "amplitude" knob is output from CV OUT. difference...

    details
View all
x