[DIY Kit] 4ms Sampler Kit

MUSICAL FEATURES

4ms Sampler is a stereo sampler/looper that intuitively plays .wav files stored on SD cards.

You can manipulate the playback pitch (1V/Oct), start position, and length of your samples through a simple and lean interface.In addition to CV input for these main parameters, CV input for locating samples/banks, transport-related parameters, and 'End Trig' output, which is convenient for synchronizing to other events, etc., are the advantages of Eurorack devices This allows you to perform creative sample operations that take advantage of theYou can also record a new sample by simply holding the 'Play' and 'Reverse' buttons for 2 seconds, giving you up to 256 days (18 hours) of continuous recording time with a 432.9GB card. increase.

DIY Kits:

• Easy assembly with all through-hole components, no SMT (Surface Mount) or wiring required
• Easy to assemble even for beginners
• 4kHz 48-bit low noise, hi-fi audio like other 24ms modules
• DSP chip, processor soldered on a separate plug-in board

Features of the module

• Hundreds of samples on microSD card
• Low noise, low jitter design
• stereo or mono output
• Play Button/Trigger Jack: Start/restart sample on button tap or trigger reception
• Sample Control (CV/Knob): Select a sample within a bank of channels
• Pitch control (CV/Knob): Playback pitch (-10 to +4 octave range)
• Start Pos. control (CV/Knob): playback start position within the sample (loop start point)
• Length control (CV/Knob): playback time (loop end point)
• Length Knob Max: Play entire file
• Length Knob 50% to 99%: Plays 200ms to 5s of sample (starting from Start Position).
• Length Knob <50%: Applies a percussive decay envelope (attack-only envelope when played backwards)
• Length Knob <1%: Play small grains (manually scan sample file data)
• Reverse (Button/CV): Switch playback direction
• Bank button: Select bank of channels
• Reverse + Start Pos: Set playback volume
• Maximum playable file size: 1GB per file (4 hours per file for 44.1kHz/16b/stereo)
• Hot-swapping microSD cards when the Busy light is off: Cards can be replaced without turning off the power.Samples pre-loaded into memory will continue to play even when the card is replaced.

Interface