Random*Source Serge Triple+ Waveshaper (TWS+)

Triple Waveshaper is one of the main wave shaper modules in the Serge system. Equipped with three independent wave shapers, you can process up to three sounds in parallel. Also, the output of the lower section can be internally connected to the input of the upper section by the Link switch, and it is also possible to connect the sections serially. In addition, the Random * Source version of Serge TWS has been expanded, and another shaping circuit has been added to the bottom section serially ("+1"). When only the upper Link switch is turned on, shaping is performed. It is possible to use two circuits by connecting two circuits serially.

About Serge
Serge Modular was originally developed as a system with different voltage and size from Eurorack, and now it is also Eurorack like this product, but there are also the following unique rules for jacks and voltage used. There is.

• The voltage range used is smaller than a regular Eurorack module. In the case of an oscillator, the width of the upper and lower ends of a normal Eurorack is 10V (10Vpp), while that of Serge Euro is 4-6Vpp. The input to the filter is also designed according to the level, so when using with other companies' products, use a signal booster or attenuator as appropriate.
• In Serge, the expected voltage for each jack is represented by a color.
  Red: Gate
  White: Unipolar (0V or more)
  Black: bipolar (assuming negative voltage as well as 0 V or more)
  In terms of signal speed, any jack will work at audio and CV rates, which is a feature of the Serge system.