Random*Source Serge GTO

Name: Random*Source Serge GTO
Brand: Random*Source
SKU: RANSERGTO10100
Price: 72900 JPY
Availability: InStock

Random * Source

¥72,900 (Tax excluded ¥66,273)

Super versatile, high precision, high speed lag and hold processor newly designed by Serge

Analog Oscillator Bit Crush Envelope Follower Envelope Generator LFO Sample and Hold / Track and Hold / Shift Register Slew Limiter Trigger Delay / VC Gate / Burst Generator

Format: Eurorack
Width: 18HP
Depth: --mm
Current: 50mA @ + 12V, 50mA @ -12V

Manual PDF (English)

To protect the original signal voltage range of Serge, the signal handled by Random * Source Serge is smaller than the standard Eurorack module, which is 5V at Peak to Peak.It is not as small as the line level, but when using it with other companies' products, pass it through a signal booster or attenuator as needed.

Qty / qty

MUSICAL FEATURES

The Serge GTO is an evolution of the Smooth & Stepped Generator (SSG), a newly redesigned dual 'lug and hold' device with a focus on stability, precision and speed. Like the SSG, the GTO consists of two sections that differ in some aspects, and the right side can be operated as the Smooth Side as well as the left side by switching the switch.

Each side features a temperature-guaranteed 20V/octave input with a frequency range of 8kHz on the left side and 1kHz on the right side, allowing you to track over 5 or 6 octaves.

On the right side there are three different sample modes which greatly expand the track and hold possibilities of the classic SSG, as well as a 'RUN' input, which the GTO can use in the following ways depending on the patch:

Through processor
Portamento
Oscillator
LFO
metalizer
Triggered step generator
Subharmonic generator/divider
VCA
low pass gate
Sample & hold
track and hold
set of comparators
Trigger delay
one-shot
Envelope follower
Quadrature function generator
bit crusher
etc ..

HOW TO USE

In the GTO, the left side acts as a lag processor (slew limiter) as a Smooth section, and the right side provides sample and hold and track and hold functions as a Stepped section. Both can also self-oscillate in cycle mode and become a 1V/Oct tracking VCO.

The Smooth section only has a Cycle switch; when Cycle is ON it oscillates a triangle wave, and when it is OFF it becomes a lag processor; its operation is simple.

The Stepped section has a Cycle switch as well as a mode switch in the middle, making its operation more complex. For normal sample and hold, use the SMPL mode (switch up), in the middle position it is in the Smooth mode like the left, and in the down position it is in the INV mode, which is the opposite of the SMPL mode.

Interface

The explanation of each part is displayed by mouse over

* In Serge, the expected voltage is indicated by the color of the jack.

"Red" : Gate (ON: 5V)
White: 0V to 5V unipolar signal (DC coupling)
black: -2.5V-2.5VBipolar signal (AC coupling)

TOP