Skip
Free domestic shipping over 15,000 yen | FREE DHL SHIPPING WORLDWIDE FOR ORDERS 50K+ yen : Details
Free domestic shipping over 15,000 yen | FREE DHL SHIPPING WORLDWIDE FOR ORDERS 50K+ yen : Details

Expert Sleepers Ivo

¥30,900 (Tax excluded ¥28,091)
Uses discrete transistor OTA. Expert Sleepers analog lowpass VCF

Format: Eurorack
Width: 8HP
Depth: 37mm
Current: 22mA @ + 12V, 18mA @ -12V

Manual Pdf (English)

MUSICAL FEATURES

Expert Sleepers Ivo is a fully analog resonant lowpass VCF module that implements discrete transistor OTA circuitry.The response characteristics of the filter that supports feedback (resonance) and CV control of the cutoff frequency are 2-pole (12dB / Oct) mode, which allows self-oscillation, and 3-pole (18dB / 2dB /) with a switch on the front panel. You can also switch to Oct) mode.In addition, this unit has two audio inputs, one of which is equipped with an attenuator, so it is possible to mix the two input signals.

HOW TO USE

The Ivo input / output jack lights red for positive voltage and blue for negative voltage.The audio signal looks purple because the plus and minus alternate quickly.Inputs with attenuators are dotted with jacks and corresponding attenuator knobs. The I / O jacks on the Ivo are arranged from top to bottom as shown below.

  • Filter Cutoff CV input.Approximately 1V / Oct response
  • Second Cutoff CV input.With attenuator
  • Feedback CV input.With attenuator
  • Audio input
  • Second audio input.With attenuator
  • Audio output

The two cutoff inputs are added together.Similarly, the two audio inputs are added (mixed).In addition to the three attenuators, the controls include a cutoff frequency knob (blue) and a feedback (resonance) knob (yellow). The poles switch selects the filter response from 2-pole (2dB / Oct) and 3-pole (2dB / Oct).

DEMO

TOP
x