Skip to content
Free domestic shipping over 15,000 yen | FREE DHL SHIPPING WORLDWIDE FOR ORDERS 50K+ yen : Details
Free domestic shipping over 15,000 yen | FREE DHL SHIPPING WORLDWIDE FOR ORDERS 50K+ yen : Details
Random * Source Serge Dual Universal Slope Generator Mk2 (DSG)

Random*Source Serge Dual Universal Slope Generator Mk2 (DSG)

Random * Source
¥77,900 (Tax excluded ¥70,818)
Serge's original "army knife" module, which is also a powerful oscillator!
Analog Oscillator clock generator Envelope Follower Envelope Generator Filter LFO Slew Limiter Trigger Delay / VC Gate / Burst Generator

Format: Eurorack
Width: 26HP
Depth: 40mm
Current: 90mA @ + 12V, 80mA @ -12V, 0mA @ + 5V

* A range switch has been added since 2021. (Image is being prepared)

To protect the original signal voltage range of Serge, the signal handled by Random * Source Serge is smaller than the standard Eurorack module, which is 5V at Peak to Peak.It is not as small as the line level, but when using it with other companies' products, pass it through a signal booster or attenuator as needed.


MUSICAL FEATURES

The Serge Dual Universal Slope Generator (DSG) is the most versatile module in a Serge system that enables a wide range of features in both CV and audio. Many function generators in Eurolac are affected by this module. The DSG has two slope generators with the following basic specifications and functions:
  • When you enter a signal to "IN", the input voltage is delayed at the speed specified by Rise when the input voltage rises, and the change in the input voltage is delayed at the speed specified by Fall at the time of descent (lag processor) , through). With this feature, if you put a pitch CVCarriageEnter the gate, and you'll find 100% sustainASR EnvelopeEnter the sound,Envelope FollowerDuckLow-resolution filtersCan be used as.
  • When you enter a gate or trigger signal to "TRIG IN", it rises at the time specified by Rise and triggers the movement of the voltage that falls once at the time specified by Fall. This feature allows you toAD EnvelopeCan be used as.
  • When Cycle ON is on, the voltage that repeats the rise in rise time to fall time is output, and it becomes an oscillator.Vconext, and the longerLfoCan be used as.
Furthermore, using the "END" output output as a signal at the end of Fall, the trigger entered in Trig In is output by delaying the time of Rise and Fall,Trigger DelayIt comes to. Also, when the AD envelope is up, it is not retriggered by a signal to Trig In, so you can enter the clock to Trig In and set the Rise and Fall time for longer than the clock time interval.clock dividerif you do not want to use it If you enter a pulse wave into Trig In for the same reason, you can output a subharmonic, such as an integer octave below (Subharmonic Generator).

In particular, the DSG mk2 has enhanced audio capabilities, allowing tracking of about 4 octaves.

About Serge
Serge was originally developed as a system with different voltages and sizes from Eurorack, and now it is euro-racked like this product, but there are also unique rules for jacking and the voltage used.
  • The range of voltageused is smaller than the normal Eurorack module. In a normal Eurorack, the upper and lower end width of the voltage is 10V (10Vpp) while the Serge Euro is 4-6Vpp. Input to the filter is also designed to match the level, so use it through a signal booster or attenuator as appropriate when using it with other companies' products.
  • In Serge, the expected voltage for each jack is represented by color.
    Red: Gate
    White: Unipolar (voltage greater than 0V)
    Black: Bipolar (assuming negative voltage as well as 0V or higher)
    As for the speed of the signal, it works at audio rate and CV rate in any jack, which is a feature of the Serge system.
 

DEMO







Top
x