Utility / Tool / Cable

MUSICAL FEATURES It is a screw to stop the Eurorack module on the rail. Length 6mm.

MUSICAL FEATURES Pico DrumsIt is a device for uploading samples to the module.In addition to this device, you will need a Google Chrome plug-in f...

Hub is a four-channel passive multiple. It is not an Intellijel logo, but a robot mark design.

* There may be scratches associated with manufacturing.Please note on your purchase.MUSICAL FEATURES Two7U Performance CaseThis is a joint part f...

MUSICAL FEATURES This is a cable holder (size 300mm) for attaching a 3.5mm patch cable. Two screws for wall mounting and two anchors for gypsum b ...

MUSICAL FEATURES It is a cable holder (size 200mm) to keep a 3.5mm patch cable.Two screws for wall mounting and two anchors for gypsum board moun...

MUSICAL FEATURES This is a 3-pin cable to chain the input / output of 4ms Listen Four, Listen Four Quarters, Listen IO, and Wav Recorder modules.

MUSICAL FEATURES This is a new version of the balanced stereo input / output part of the 7U Performance Case.The 7U Performance Case from the ...

It is a conversion mono cable of 3.5mm to 1/4 inch.

MUSICAL FEATURES Screw driver for module installation. Reversible and can be used as a flathead screwdriver. Made by Electrosmith.

MUSICAL FEATURES It is a bracket that can connect two Tiptop Audio Mantis cases.

A rack ear kit for mounting the MUSICAL FEATURES SYNTRX on an EIA 19-inch standard sradio rack. Remove the side wood of the SYNTRX body and install this rack ear. * A pair of 2 bottles.The SYNTRX body and open rack system in the image are not included.  

MUSICAL FEATURES DSG separates the three DIN Sync signals into a CLOCK signal and a RUN signal, and outputs them from a normal Eurorack 3.5mm jack...

The MUSICAL FEATURES Befaco Knurlies are rack mount screws designed for Eurorack.Knurlies, which can be tightened with a finger, screwdriver, or hex wrench, are pre-installed with plastic washers to prevent scratches when mounted ...

MUSICAL FEATURES Befaco Bananuts are custom anodized minijack nuts that follow the Buchla / Serge coloring code.Great for color-coding inputs and outputs and for personalizing your favorite modules.This nut driver is for installation ...

The MUSICAL FEATURES Befaco Wrench Tool is a nut driver with the Befaco logo that can be used with Bananuts and common 3.5mm round nuts. 

MUSICAL FEATURES High quality Befaco interface cable with 3.5mm monaural mini plug and 6.3mm monaural standard plug at both ends.This is useful when connecting Eurorack system signals to external devices such as mixers, effect pedals, and audio interfaces. 1 ...

Befaco's Passive Multiple with 3.5 MUSICAL FEATURES 6mm jacks. Sold as a 3-color set.

The MUSICAL FEATURES Befaco DIN 5 MIDI to TRS Cable is a suitable cable for standard MIDI connections on devices with TRS jacks, such as Eurorack modules and groove boxes.One end of the cable is a 5-pin DIN jack (male), the other is a 3.5mm stereo ...

MUSICAL FEATURES 3:1 (3 to 1) is a voltage controllable gate switch/mixer module.If the input signal is greater than 2.5V and gate HIGH, less than...

The MUSICAL FEATURES Befaco Synth Duster is a very soft cleaning brush that protects modular systems and audio equipment from dust and dirt.The long bristles make it easy to clean the intricate knob gaps.

MUSICAL FEATURES Klavis Twin Waves has two independently algorithm selectable VCOs (or LFOs) on 8HPUltra-compact dual oscillatoris. In each oscilla...

MUSICAL FEATURES MIDI (DIN) 5-pin female to TRS 3.5mm male conversion adapter (Type B). Compatible with all ELM Busy and Arturia instruments, but also with Make Noise and Korg MIDI. It cannot be used because the pin arrangement a?E is different from TRS...

MUSICAL FEATURES This cable is plugged in by Expert Sleepers Silent Way It is a recommended cable when outputting CV from the audio interface by ...

MUSICAL FEATURES 5mm TS cable splitter that splits the input signal into five

MUSICAL FEATURES Cable for connecting multiple groups in the CGM Creative Mixer system. You can connect one Group to Masterone with the Master to Group cable that comes with Masterone, but the number of Groups connected to Masterone is limited.

MUSICAL FEATURES CGM Creative Mixer system, cable for connecting from Masterone to one Group. Comes with Masterone. A Master to Group cable has three IDC connectors, one for the group and one for the master...

MUSICAL FEATURES An original serial programmer that users can use to update the firmware of Shakmat modules, including the Bard Quartet (the company's module FW can also be updated with commercially available FTDI programmers).

MUSICAL FEATURES Zero HP Mult is a 1:5 cable splitter/passive multiple.It can be used to send master clocks and modulations without sacrificing system rack space, or as a simple cable extension.

MUSICAL FEATURES Banana and alligator clip conversion adapter.You can convert it to an alligator by inserting a banana plug.

MUSICAL FEATURES Banana jack and 3.5mm mono conversion cable for Eurorack. *When patching between Eurorack systems and Banana systems, it is necessary to share the ground.When using this conversion cable, at least one cable must be a Y-type, and the branched black bar...

MUSICAL FEATURES An adapter that allows you to connect to a banana jack by touch or with an alligator clip.

MUSICAL FEATURES Clip type sensor cable that can be used with Instruo Scion.

MUSICAL FEATURES Banana Jack and 6.35mm (1/4") mono conversion cable. *When patching between a system with a 1/4 inch jack and a banana system, it is necessary to share the ground.When using this conversion cable, at least one cable must be a Y-type and branched...

MUSICAL FEATURES An arm-mounted cable hanger with a metal clamp.The arm can be bent flexibly.  

MUSICAL FEATURES Screwdriver-free mounting screws that can be turned with your fingers