1U (Intellijel)

MUSICAL FEATURES Out is a 1U stereo output module designed for converting audio signals from modular to line level. The signal patched to Main In is output to the pin on the back, so you can connect that pin to the Intellijel Performance Case or Palette Ca...

The MUSICAL FEATURES ST Amp is a 1U stereo amplifier designed for boosting external signals to modular levels.This module is designed in Intellijel 1U format and uses the same pinout, so it is fully compatible with the rear connector of the Intellijel case...

MUSICAL FEATURES STMix is ​​a 1U format/28HP 4-channel stereo mixer.Besides working alone, it works as an expander for the company's Hexmix module via a 6-pin connector on the back.This module is designed in Intellijel's 1U format...

MUSICAL FEATURES AUDIO I/O 1Uinput and output module for use in 1U space such as 4U case (old type that is not Palette).

The 1U module of Intellijel is not compatible with the 1U "TILE" format of Synthrotek and Pulp Logic.Please install it in the Intellijel 4U, 7U cas...

Intellijel's 1U module is not compatible with the 1U "TILE" format smade by Synthrotek or Pulp Logic.Install it in intellijel 4U, 7U case, etc. Fo ...

The 1 U module of Intellijel is not compatible with the 1 U "TILE" format made in Synthrotek and Pulp Logic.I install it in 4 U of Intellijel, a 7 ...

The 1 U module of Intellijel is not compatible with the 1 U "TILE" format made in Synthrotek and Pulp Logic.I install it in 4 U of Intellijel, a 7 ...

MUSICAL FEATURES Compact 2-channel VCA module. The characteristics are linear and DC coupled. The signal and CV inputs are internally wired so t ...

Intellijel's 1U module is not compatible with the 1U "TILE" format from Synthrotek or Pulp Logic. Please install and use it in Intellijel 4U, 7U ca...

MUSICAL FEATURES The FSR 1U is a pressure CV output module using custom-made sensing resistors. In addition to the CV output according to the press...

MUSICAL FEATURES FSR 1U is a pressure CV output module using a custom-made sensing resistor (Forse sensing resistor). In addition to the CV output according to the pressure, the gate signal is output from GATE while touching DEMO

MUSICAL FEATURES Line In 1U is a compact and easy solution for optimizing line level external equipment such as hardware synthesizers and drum machines to Eurorack level.Your desktop gear, rack-mount type effect unit, output from your DAW, etc., balun ...

MUSICAL FEATURES Line In 1U is a compact and easy solution for optimizing line level external equipment such as hardware synthesizers and drum machines to Eurorack level.Your desktop gear, rack-mount type effect unit, output from your DAW, etc., balun ...

Intellijel's 1U module is not compatible with the 1U "TILE" format smade by Synthrotek or Pulp Logic.Install it in intellijel 4U, 7U case, etc. Fo ...

The 1 U module of Intellijel is not compatible with the 1 U "TILE" format made in Synthrotek and Pulp Logic.I install it in 4 U of Intellijel, a 7 ...

The 1U module of intellijel is not compatible with the synonytek and 1p "scale" format made by pulp logic.Install in 4U, 7U case of intellijel.Si ...

MUSICAL FEATURES Multi-FX is a mono-stereo I / O effect module with well-tuned switchable delay chorus reverb effects. The mode of the effect i ...

Intellijel's 1U module is not compatible with the 1U "TILE" format smade by Synthrotek or Pulp Logic.Install it in intellijel 4U, 7U case, etc. Fo ...

MUSICAL FEATURES Octalink 1U is a module for sending eight signals together with a single LAN cable.If you have a patch between two 7U cases throu...

MUSICAL FEATURES Passive LPG 1U is a simple passive low pass gate of Bactrol base, 1U. The acoustic characteristics of Bactrol LPG, which is a passive circuit that does not require a power supply, depends to some extent on the input audio signal, and can give a natural and organic change in the volume and timbre of the signal.

MUSICAL FEATURES Pedal I / O 1U is an interface module for modular use of effect pedals.It has high impedance inputs and separate send and return ...

MUSICAL FEATURES In the old type 4U case of Intellijel which is not Palette typePeda I / O 1UIt is a module of 1/4 inch jack part required when using.

Intellijel's 1U module is not compatible with the 1U "TILE" format smade by Synthrotek or Pulp Logic.Install it in intellijel 4U, 7U case, etc. Fo ...

MUSICAL FEATURES Intellijel bus boardTPS30W1U module with switch to draw power from AC adapter

Music features Intellijel bus boardTps80w1U module for pulling power from AC adapter.

MUSICAL FEATURES This is a 4CH utility module that can be used as an attenuator, offset voltage output, and mixer. Each channel is --When the inpu ...

MUSICAL FEATURES 1U format ring modulator.From two input source waveforms, X and Y, generates a third waveform containing the sum and difference of their frequencies.You can use ring modulation at audio rates to create discordant, metallic sounds, or at LFO rates to create complex...

MUSICAL FEATURES Steppy 1 U is a gate sequencer module of 4 trucks. It is equipped with eight memory slots, same period with the outside clock and ...

Intellijel's 1U module is not compatible with the 1U "TILE" format smade by Synthrotek or Pulp Logic.Install it in intellijel 4U, 7U case, etc. Fo ...

Intellijel's 1U module is not compatible with the 1U "TILE" format smade by Synthrotek or Pulp Logic.Install it in intellijel 4U, 7U case, etc. Fo ...

MUSICAL FEATURES A dedicated module for outputting modular audio signals for mixers and audio interfaces. Stereo input / output. Also, if you patch ...

MUSICAL FEATURES In the case of the first generation Performance case or Intellijel case that is not a 4U pallet typeStereo Line Out 1UThis is a 1 ...

The 1 U module of Intellijel is not compatible with the 1 U "TILE" format made in Synthrotek and Pulp Logic.I install it in 4 U of Intellijel, a 7 ...

Intellijel's 1U module is not compatible with the 1U "TILE" format smade by Synthrotek or Pulp Logic.Install it in intellijel 4U, 7U case, etc. Fo ...

The MUSICAL FEATURES USB Extender expands the micro USB connector on the back of the module and places it on the front panel of the case to facilitate connection to a USB host.Originally a utility designed for Metropolix 1.4 MIDI updates, but on the back ...