Skip to content
Free domestic shipping over 15,000 yen | FREE DHL SHIPPING WORLDWIDE FOR ORDERS 50K+ yen : Details
Free domestic shipping over 15,000 yen | FREE DHL SHIPPING WORLDWIDE FOR ORDERS 50K+ yen : Details
Instruo Vinca

Instruo Vinca

Instruo
¥36,900 (Tax excluded ¥33,545)
4HP / 2CH VCA full of usable control and routing functions
VCA

Format: Eurorack
Width: 4HP
Depth: 35mm
Current: 30mA @ + 12V, 25mA @ -12V

Manual pdf (English)
Quickstart Guide pdf (English)

*Since the bipolar offset control for CH1 moves from minus to plus, it is difficult to set it to 0 exactly, and a small amount of sound leakage may occur at CV=0.

MUSICAL FEATURES

 Vincâ is a two-channel VCA. One VCA has an offset (bias) control and can operate CV in the negative direction. The other VCA is gain controlled by a slider, and when patched to CVin, the slider acts as an attenuator for that CV. Here, the response to the input CV can be continuously changed from linear to exponential.

 Vinca also allows for flexible routing. Switches allow the two channels to be combined serially or in parallel. In the case of serial, when not patched to the output of CH1, the output is internally connected to the input of CH2 without a patch. In the case of parallel, when not patched to the output of CH1, the output of CH1 is also mixed and output from the output of CH2. In addition, 3.5mm jacks of "In" and "Out" are mounted on the back of the board, and when patching from the out of one Vinca (A) to the In of another Vinca (B) through the back of the board, it is patched to the output of A If not, the output of A will be mixed with the output of B. A 3.5mm cable to connect to the back of the board is also included.
Top
x