4ms pingable envelope generator (PEG)

The 4ms pingable envelope generator (PEG) is a two channel high function envelope generator that allows you to adjust the length of the envelope to the Ping clock or Ping timings.

If the peg is in sync mode, the time between the beginning and end of the envelope is determined by the Ping interval and the divde knob. Synchronous mode is the mode when no input is input to the async input, and when the trigger or gate Signal enters the qnt input, the timing of the envelope synchronizes with the Ping clock. Also, when you cycle the envelope by pressing the cycle button, the timing will be synchronized to the Ping clock. Thanks to the dexterity of synchronization with this Ping clock. , the pegLFO synchronized with clockIt is also very high quality. In an analog LFO triggered by a normal clock, the period does not coincide with the clock interval, and it is likely to become the LFO of the half waveform, but in the peg, the period coincides with the clock, so that natural clock synchronous LFO can be made.

In the "asynchronous mode" where the timing is not turned on, like an ordinary envelope, enter the trigger or gate signal to the async input.

The end of cycle, end of fall, or output functions, such as the output or cycle mode, are well suited to the many functions of the envelopeCurve that can be set in different ways to bend and fallIt becomes a CV generator with various deviations. It is very strong in the envelope and the sink LFO with the groove feeling in the long time.

* if this module is sent to the VCA, there is a chance that there will be a sharp sound at the time of attack or release depending on the location of skew or curve. gate as VCA (or pass the envelope of the peg once to the low pass gate), pass the envelope once through the limiter, pass the VCA through the low pass filter, and pass the low pass filter.