Z-DSPClock Dilly DSP card. A Z-DSP is required to use.
For any algorithm, the machine lock for synchronization must be entered at the middle of the Z-DSP's 3 CV input in the middle of the VC-P2 Jack.The corresponding knob (VC-DSP2) should be located at 0.The clock that you enter for synchronization does not react correctly with a short triger signal. Enter the length of the clock's gate set to 25% -50%.
The speed of the clock that can be used per BPM on the input clock is different:
BPM60 or lower or sixteen minutes of clock, enter a pulse width of 50%.
BPM61-120 Enter a 4-minute clock with a pulse width of 25% -50%.
BPM120-180 Enter a 4-minute or 2-minute clock with a pulse width of 25%
Enter a BPM180 or a 2-minute or full-tone clock clock with a pulse width of 25%