2hp Loop
Format: Eurorack
Width: 2HP
Depth: 42mm
Current: 83mA @ + 12V, 8mA @ -12V
Manual pdf (English)
Format: Eurorack
Width: 2HP
Depth: 42mm
Current: 83mA @ + 12V, 8mA @ -12V
Manual pdf (English)
Loop is a hi-fi audio looper module with four unique recording modes and an intuitive interface.You can capture up to 4 minutes of audio and play it at half the speed.Each recording uses one of four modes: Sound on Sound, Dub, Replace, and Infinite (Frippertronics).The recorded content will be erased when the power is turned off.
To start recording to the Loop, send any audio source to the IN port at the top of the module.The terminal directly below the audio input is the recording gate input attached to the RECORD button, and the recording is switched on / off by the incoming gate signal.Incoming audio can be monitored from OUT at the bottom of the module. Use the IN LVL knob to set the level of audio sent to the MIX and recording buffers. Use the MIX knob to control the Dry / Wet balance between live audio and Loop. The input signal is recorded even with the 100% Wet setting.
Next, select the four recording modes used for recording from the following with the MODE button.
If the recording is successful, Loop will immediately replay the contents of the buffer repeatedly. You can use the SHIFT button to execute commands such as: