4ms Sampler

MUSICAL FEATURES

The 4ms Sampler is a stereo sampler/looper that allows you to intuitively play .wav files stored on an SD card. It's a single-channel version of the company's Stereo Triggered Sampler (STS) , and the edit mode has been removed, but stereo output is still possible, and a Bank CV control, which was not present in the STS, has been added.

Sampler allows you to manipulate the playback pitch (1V/Oct), start position and length of your samples through a simple and streamlined interface.In addition to CV input for these main parameters, CV input for locating samples/banks, CV input for parameters related to transport, and 'End Trig' output convenient for synchronizing to other events, etc., are the advantages of Eurorack devices. This allows you to perform creative sample operations that take advantage of theYou can also record a new sample by simply holding the 'Play' and 'Reverse' buttons for 2 seconds, giving you up to 256 days (18 hours) of continuous recording time with a 432.9GB card. increase.

• Hundreds of samples on microSD card
• Low noise, low jitter design
• stereo or mono output
• Play Button/Trigger Jack: Start/restart sample on button tap or trigger reception
• Sample Control (CV/Knob): Select a sample within a bank of channels
• Pitch control (CV/Knob): Playback pitch (-10 to +4 octave range)
• Start Pos. control (CV/Knob): playback start position within the sample (loop start point)
• Length control (CV/Knob): playback time (loop end point)
• Length Knob Max: Play entire file
• Length Knob 50% to 99%: Plays 200ms to 5s of sample (starting from Start Position).
• Length Knob <50%: Applies a percussive decay envelope (attack-only envelope when played backwards)
• Length Knob <1%: Play small grains (manually scan sample file data)
• Reverse (Button/CV): Switch playback direction
• Bank button: Select bank of channels
• Reverse + Start Pos: Set playback volume
• Maximum playable file size: 1GB per file (4 hours per file for 44.1kHz/16b/stereo)
• Hot-swapping microSD cards when the Busy light is off: Cards can be replaced without turning off the power.Samples pre-loaded into memory will continue to play even when the card is replaced.

Interface