Tiptop Audio Mantis Red

The Mantis is a powered Eurorack case consisting of 104 HP x 2 tiers (208 HP total). It is a new standard case with a power supply, which has a well-designed design for power supply, module connector, positioning, etc. Version with red legs
 

• 208HP (104HP X 2)
• Equipped with 36 connectors for module connection. When facing the front of the case, SECTION A / B is on the bottom and SECTION C is on the right -12V (red stripe) side.
• The depth of the installable module is about 50 mm at the top and about 60 mm at the bottom. Please refer to the drawing below for the slope and internal structure
• Maximum current consumption per rail is 3A @ 12V (up to 3A for each of the three sections on the bus board), 1A@-1.1V, 12mA @ 300V
• The body is a very light gray.
• Weight 3 kg (excluding AC adapter)
• Can be installed in three positions: horizontal, diagonal, and almost upright. The outlet of the AC adapter jack can also be installed on the upper side and the back and changed according to the position
• The rail uses 104HP Z-Rails and the nut (M3) is a bar nut type.
• With AC adapter

* When folding the legs, pull out the part marked "PULL HERE" on the legs and move it. Please note that we do not provide warranty or repairs for damaged legs. How to openHere (pdf).
* The legs of the products on this page are red, unlike some photos.