Mutable Instruments Shades

Shades is a 3-channel utility module that can also be used as an attenuator, offset voltage output, and mixer. You can also check the output signal by LED.
 

Unipolar / Bipolar

Each channel has two modes depending on the switch, and when the switch is on, the knob of that channel becomes an Atte inverter that can also invert the signal, and the 2 position is in the middle. When the switch is in the lower position, the knob becomes an attenuator, and the 0 position is the position that is turned all the way to the left.
 

Mixer

If the output of each channel is not patched, it will be mixed and output from the output of the next channel. When both CH1,2 and 3 outputs are not patched, the CH3 output outputs a mixed signal of the three signals and can also function as a mixer.
Br>

Offset

When nothing is stuck in the input jack, a constant voltage of 5V (10V can be selected by jumper setting for each channel) is connected to the input. Therefore, it is possible to output a constant voltage.