Skip
Free domestic shipping over 15,000 yen | FREE DHL SHIPPING WORLDWIDE FOR ORDERS 30K+ yen: Details
Free domestic shipping over 15,000 yen | FREE DHL SHIPPING WORLDWIDE FOR ORDERS 30K+ yen: Details

MUSICAL FEATURES

Contour 1 is a classical circuit that has been popular as the main element of modular synths due to its versatility.Through limiterThis is a slew limiter / function generator in which the performance and operation surface have been brushed up with modern design technology.

The basic function of the slew limiter is to slow down the rate of voltage change of the signal to IN. In Contour 1, two sliders and CV modulation can control the rising speed (Rise) and the falling speed (Fall) independently. The time range for Rise and Fall is 500 μs to 30 seconds. With this through function, when the gate is input to INASR envelope(100% sustain, attack time = Rise, release time = Fall). 

Also, by inputting a signal to TRIG. Or pressing the manual trigger button, + 10VAD envelopeStart up. When set to Loop mode, Contour 1 will continue to retrigger itself and the envelope will cycle. ThisLFOWorks as well.

You can also use the BEND knob and BEND CV input to twist the slope shapes of Rise and Fall individually from exponential to linear or logarithmic. In Contour 1, even if you do this operation, the time of Rise and FallIt remains almost constant.

The HOLD input slows the core of the slew to near stop while the gate signal is high (TRACK & HOLD). This function, which can also operate at the audio rate, can be used for effects similar to oscillator sync, or for pausing modulation.

Contour 1's TRIG., GATE, and HOLD inputs are uniquely designed to accurately handle extremely slow or weak bipolar signals.In addition to the main output and inverted output, the output stage is also equipped with a RISE / FALL output that outputs a + 5V gate while the slope is rising or falling.



DEMO

x