Skip
Free domestic shipping over 15,000 yen | FREE DHL SHIPPING WORLDWIDE FOR ORDERS 50K+ yen : Details
Free domestic shipping over 15,000 yen | FREE DHL SHIPPING WORLDWIDE FOR ORDERS 50K+ yen : Details

Intellijel Designs Aux Mix 1U

¥34,900 (Tax excluded ¥31,727)
3-channel stereo mixer with effects send/return

Format: 1U (Power supply is shared with Eurorack 3U)
Width: 32HP
Depth: 42mm
Current: 48mA @ 12V, 42mA @ -12V

For the latest Intellijel manuals and firmware, please contact the manufacturer.Support pageSee also

Manual PDF (English)

In stock. Orders made by 15:XNUMX will be shipped the same day

MUSICAL FEATURES

The Aux Mix 1U is a 2-channel stereo mixer module with 3-channel stereo Aux buses.
It provides a variety of routing options, including effects sends, parallel audio processing, and feedback mixing.

Each channel has a pair of stereo input jacks, with the left channel input normalized to the right channel input for easy mono processing. All three channels feature level attenuators, mute switches, LED input level indicators, and the stereo signal is summed to the main output, from which it can be patched into a larger Eurorack system or external pro audio gear. In addition, both the main and aux output stages feature soft-clipping diodes to ensure smooth saturation even at very high signal levels.

In addition to the main mix controls, channels 1 and 2 also feature aux level attenuators with Pre/Post switches, allowing you to create independent aux mixes that are routed to a separate output pair from the main mix.

The rear of the module features four 4-pin connectors, Aux In, Aux Out, Chain In, and Chain Out, allowing you to route audio directly to the module without needing an Intellijel case or patch cables.You can also chain multiple Aux Mix 3U modules together to form a larger mix chain.

- 3 stereo inputs with normalization for mono signal input
-Each channel is equipped with a mute switch and an LED input level indicator
-Individual Pre/Post routing switches and stereo aux controls for channels 1 and 2
- Main and Aux busses feature soft clipping diodes to prevent hard clipping
- Chain connection of mix bus and AUX bus with compatible products using connectors on the board
-AC coupling specification designed specifically for audio
-Logarithmic attenuator provides smooth, consistent response across the entire volume range

Interface

 
The explanation of each part is displayed by mouse over
Connection from the board
[1] CHAIN-IN: Adds one stereo input and connects to MIX OUT.Mix and output
[2] CHAIN-OUT: Outputs the same signal as MIX OUT
[3] AUX_CHAIN-IN: Adds one stereo input and mixes it to the AUX OUT for output.
[4] AUX_CHAIN-OUT: Outputs the same signal as AUX OUT.

These terminals can be used to chain Aux Mix 1U together, or to connect to modules such as Mixup and Outs, or to audio jacks on the back of the board on the 7U Performance Case or Palette Case.

Aux Mix 1U Chain
Input the output of Mix Up to Aux Mix 1U
Aux Mix 1U output to Outsinput
TOP
x