Instruo Vinca

MUSICAL FEATURES

Vincâ is a two-channel VCA.The upper VCA acts as a 2-quadrant multiplier that multiplies the input signal by the input CV. If the combined effect of CV and offset is negative, the waveform will be inverted rather than zero amplitude, and inputting audio to CV will produce an effect equivalent to ring modulation.It has a bipolar offset (bias) control and an attenuverter for the CV input.

Another VCA has gain controlled by a slider, and when patched to CVin the slider acts as an attenuator for that CV.This can continuously change the response to the input CV from linear to exponential.

Vinca also allows flexible switching of routing. The switch allows the two channels to be combined serially or in parallel. In case of serial, when the output of CH2 is not patched, its output is internally connected to the input of CH1 without patch. In the case of parallel, when not patched to CH2 output, CH1 output is also mixed with CH2 output. In addition, "In" and "Out" 1mm jacks are mounted on the back of the board, and when one Vinca (A) Out is patched to another Vinca (B) In through the back of the board, the output of A is patched. When not turned on, the output of A is mixed with the output of B. A 3.5mm cable for connecting to the back of the board is also included.