Intellijel Designs 7U Performance Case (84HP)

It is a case with 3HP power lid that has two 2U spaces and one 1U space at the top. Various improvements have been made to improve the performance of the modular. In addition to the lid, an AC adapter is included (the strap has been discontinued since the summer of 1 and is not included).
 

• 1U (Intellijel standard) module centering on utility system can be installed in 1U space. The power supply is the same as the 3U module.
• Rails use M3 bar nuts
• Robust plastic carry handle
• Comes with an aluminum lid that has been treated with an adjunct, and can be installed as a patch
• Folding legs allow you to place it with two levels of incline. It can also be laid flat
• With accessory slots on the top and bottom, you can attach an optional joint
• Audio I/O 1UStereo Line Out 1U,Pedal I / O 1UEquipped with a 1/4 inch audio jack that can be used with the rear panel (upper side). The audio jack part has been newer than the sales since the summer of 2019. Detail isArticles
• uMIDI 1UorMIDI 1UEquipped with MIDI In, Thru, and USB terminals on the rear panel (upper side) that are connected with a ribbon cable. There is also a MIDI Out terminal, which may be used in the future
• Equipped with a DC jack for connecting the AC adapter and a power switch on the rear panel (upper side)
• Weight is 3.8 kg including lid (4.3 kg including AC adapter)
• The maximum module depth that can be installed is 70 mm and 53 mm on the bus board. The bus board is mounted on the bottom of the 3U lower side, so the upper side is all 70 mm deep
• The maximum current is 3A @ 12V, 3A @ -12V, 1.5A@5V. AC adapter for Japan included

Product image
* There are some 104HP size case images, but there is no difference in appearance except width.