Steady State Fate V-Mutes

MUSICAL FEATURES

Steady State Fate V-MutesVorticesIt is an expander that adds a mute function to.This module retains all the functionality of the V-CV expander shipped with Vortices, but adds a master mute feature that allows all seven VCA controlled signal inputs and all seven channels to be muted at the same time.There is no click sound associated with applying / canceling mute, and the status of the channel being muted can be visually confirmed with the LED of the button, so accurate mute operation is possible even during performance.Also, even when using master mute, which enables batch mute of all channels, the LED indicating the status of each channel is retained, so you can preset the channel to be active before unmaster mute. ..

HOW TO USE

Connection with Vortices

Use the 10-pin-10-pin expander cable that comes with Vortices and the ribbon cable that connects to the power header on the V-Mutes board to connect to the unit.

1. Turn off the system power and remove the Vortices (V-CV).
2. The switch between the Vortices front panel and the boardEXPMake sure it is set to the position of.
3. If you are using the V-CV and have not already installed the cable, install the expander cable in the Vortices.
4. Attach the power cable included with V-Mutes.Of the red stripe on the cable and the power headerPOWER REDInstall so that the orientation described in is correct.
5. Connect one end of a 10-pin expander cable to the expander header on the V-Mutes board.The cable should have a red stripe pointing down.Check if the connection is correct.
6. Connect the V-Mutes power cable to the system power supply, mount both modules, and you're done.