A dual oscillator that produces a wider range of sounds with its own Fidelity control and Timbre mode from a wavetable that can also be equipped with its own waveform.
Modbap Osiris is an oscillator that can create unique tones by taking advantage of various digital functions.
The original waveform isWave table(32x32 table is based on 4 banks).Waveform is via microSD cardUser's wavetableCan also be loaded.
The Timbre section for processing the tone of the signal from the wavetable has 6 or more Timbre modes to choose from.Morphing is possible between each Timbre modeAnd this allows you to create a very unique sound.The Timbre Amount control allows you to adjust the amount of application for the selected mode.
Unison: Overlay a second detuned oscillator up to the octave
BEND: Compress the waveform to make it thinner
Fold: Introduces a symmetrical two-step wave folding that mirrors the waveform and then folds it.
Sync: Sync: Repeat the waveform cycle count in the Hanning window to soften the edges
Noise: Adds window-synchronized noise to the phase of the waveform
FMx1: FMxXNUMX: Apply phase modulation with the same waveform to the oscillator
FMx .... 8: FM sound by an oscillator with a ratio of 1 to 8 to the main oscillator pitch. Smoothly scans pitch ratios 1-8 while Timbre Mode moves from FMx1 to FMx ... 8.
More about the toneBi-FidelityIt is possible to change the texture drastically by controlling. Bi-Fidelity is Hi-Fi (on the left side of the knob) and Lo-Fi.(Right side of knob)It means to have both. Output high quality audio during Hi-Fi96kHzIt is possible to operate with. On the Lo-Fi side, Osiris adds sample jitter and even phase drift in addition to lowering the resolution.
またSub-oscillatorNot only produces a sound octave below the main oscillator, but also has its own pitch control, waveform, and output jack.Second independent oscillatorWorks as well.If the output of the sub-oscillator is unpatched, the output will be normalized to the Mix output.The waveform of the sub-oscillator can be selected from square wave, sine wave, triangle wave, -1 and -2.-1 and -2 show copies of the wavetable one octave below and two octaves below the main oscillator, respectively.
Also, by patching the Trig input, the decay can be controlled with the knob and CV.Simple synth voiceAlso works as.Also, the input pitch signal is a button.QuantizeIt is also possible.
Interface
The explanation of each part is displayed by mouse over
OsirisEdit & WavPaks Overview
Osiris is a module that allows you to select waveforms, and the WavPak wavetable is installed at the factory. The Osiris front panel has a slot for a microSD card that allows you to load additional user-created wavetables and expansion WavPaks. We recommend using OsirisEdit to create and edit wavetables that are compatible with Osiris.This application is based on Synthtech's open source application "WaveEdit" and has been improved and developed according to the Osiris wavetable format. OsirisEdit here.It is available from.The basic principle of this application is to create or import a wavetable, assemble it, and convert it into an Osiris WavPak bank compatible with Eurorack equipment.Wavetables can be imported, "drawn" using editing tools, and effects can be applied to shape the sound. More accurate editing features are available on the OsirisEdit page.
