Skip
Free domestic shipping over 15,000 yen | FREE DHL SHIPPING WORLDWIDE FOR ORDERS 50K+ yen : Details
Free domestic shipping over 15,000 yen | FREE DHL SHIPPING WORLDWIDE FOR ORDERS 50K+ yen : Details

Malekko Heavy Industry Varigate 4+

¥44,900 (Tax excluded ¥40,818)
Compact Varigate series sequencer. You can also assign gates and CV channels.

Format: Eurorack
Width: 12HP
Depth: 26mm
Current: 90mA @ + 12V, 13mA @ -12V
Manual pdf (English)

MUSICAL FEATURES

The Varigate 4+ is a 4-channel, 8-step sequencer that greatly expands the functionality of the original Varigate 4. In addition to the gate sequence, the CV / Gate switch allows all four channels to operate in either CV, 4CV and 2-gate or 2-gate mode. In addition, a Play / Stop function has been added, preset banks, step-by-step glide, and scale settings have been added. It also functions as a slave of Varigate4 + and a master of Voltage Block.

You can also set the gate output ON / OFF, the number of repeats, glide, and notes to change stochastically. Randomize function is also attached to repeat, note and glide. You can easily change the scale, sequence direction (forward, backward, round-trip, random), sequence length, clock division, multiplication, pulse width, etc. for each channel.

The sequence can be saved as a preset, including each setting in TRACK mode. Four presets are stored in one bank, and there are four banks. If you press the channel select button while holding down the Save button, the preset will be saved according to the channel you pressed in the current bank. If you press the channel select button while holding down the Recall button, the preset corresponding to the pressed channel will be recalled. To switch the active bank, press and hold both the SAVE and RECALL buttons for about 1 second, and then press the channel select button while it is blinking to switch banks 4 to 4.

Interface

 
The explanation of each part is displayed by mouse over  

To use it as a slave of Varigate8 +, set the jumper as shown at the bottom of the image (By default, the jumper is set to be the master of Voltage Block)
 

DEMO

Top
x