MUSICAL FEATURES
The Resonant EQ is a unique 10-band filter module specializing in the generation and processing of electronic sounds.With the exception of the top and bottom two frequency bands, each band has a major 2th spacing and produces formant peaks and valleys that resemble acoustic instruments.
The Resonant EQ has three types of outputs, the two COMB outputs are even and odd band outputs, and the remaining two outputs are the same and output a mix of all bands.There is no clear separation between each band, and operating either frequency knob will affect both of the two COMB outputs.Also, this equalizer has a bandResonanceIt is special in that it can be set to.When the knob is in the center position, the response of the output provided by the main EQ OUT is flat.When the knob is in the 9 to 3 o'clock range, set a boost or cut of up to 12 dB.When the knob exceeds the 3 o'clock position, the band begins to resonate, simulating the natural resonance of the formant structure of an acoustic instrument.If the knob is below the value at 9 o'clock, the band cut will be stronger.
The Eurorack version adds a 2-input Input Mixer, which is also useful for adjusting the input gain and providing manual feedback.
A feedback section with a manual knob and phase switch to set the return amount allows the output signal to be returned to the input stage without patching.By inverting the feedback signal with the phase switch, you can create unusual feedback due to the phase canceling effect.
Interface
?
The explanation of each part is displayed by mouse over
?
- Red: Gate (ON: 5V)
- White: 0V-5V unipolar signal (DC coupling)
- Black: -2.5V to 2.5V bipolar signal (AC coupling)
About SergeSerge Modular was originally developed as a system with different voltage and size from Eurorack, and now it is also Eurorack like this product, but there are also the following unique rules for jacks and voltage used. There is.
- The voltage range used is smaller than a regular Eurorack module. In the case of an oscillator, the width of the upper and lower ends of a normal Eurorack is 10V (10Vpp), while that of Serge Euro is 4-6Vpp. The input to the filter is also designed according to the level, so when using with other companies' products, use a signal booster or attenuator as appropriate.
- In Serge, the expected voltage for each jack is represented by a color.
Red: Gate
White: Unipolar (0V or more)
Black: bipolar (assuming negative voltage as well as 0 V or more)
In terms of signal speed, any jack will work at audio and CV rates, which is a feature of the Serge system.
?
DEMO
?
