Expert Sleepers ES-9
Format: Eurorack
Width: 16HP
Depth: 52mm
Current: 451mA @ + 12V, 133mA @ -12V
Manual (English)
Firmware / setting tool download page
Driver download page for Windows(Bottom of linked page)
Format: Eurorack
Width: 16HP
Depth: 52mm
Current: 451mA @ + 12V, 133mA @ -12V
Manual (English)
Firmware / setting tool download page
Driver download page for Windows(Bottom of linked page)
The ES-9 can be used as an audio interface by inserting the USB cable as it is (for Windows machines).driverPlease download and install)Setting toolYou can set the mixer as a stand-alone by downloading and installing.
8x8 crosspoint mixer setting example.Start the software, set the input of the mixer to Input1 to Input8 in the red frame above, and adjust the volume like the purple frame to use the analog inputs 9 to 1 of ES-8 as 4 stereo sets and mix. Is output to headphones (when using an 8-mono mixer, raise all sliders in purple).
As for the mixer output, headphone L / R is assigned to Output3 / 4 as default, but if other channels are included, channels can be freely assigned up to 8 outputs like the input, and the mix balance of the input channel is assigned to each output. Can be set to.For example, in the above example, Output 1/2 is assigned to the main output, and analog input 1/2 is set to be output as it is.
By pressing the Save to Flash button, the current settings can be saved in the internal memory as the default mixer settings for the connected ES-9.There are two types of memory for setting storage on the main unit, one for connecting the USB cable and one for not connecting.Individually depending on whether the USB cable is stuckIt can be set.The (Standalone) button in the blue frame is stored in the setting memory when the USB is not stuck (there may be many settings as a mixer). If you want to save it in the setting memory when the USB is stuck, press Save to Flash (Hosted) on the left. Use the two small buttons on the right side of the blue frame to load the ES-9 internal memory settings softly.